If you have made a decision to add epoxy floor paint to be used on your concrete floors then you are supposed to do some stuff before the actual painting. Such stuff you need to do, so you can plan for the paint application. You may want to check out official site for more. When you obey these instructions then it will stick to the floor and last for years before you finally roll out the epoxy.
Some people, despite their importance, don’t spend their time at the front end of the project doing these tasks, so these unlucky homeowners fail to achieve the look they hope for. If you want to get a great looking floor and get the requisite moisture protection that can flow into the cracks formed, then here are some things you need to do before you start to paint your flooring.
The first thing you’ll need to do is search for a sealer on the floor you ‘re about to paint. You won’t want to waste your money to paint a floor with a sealer on its surface, because the paint just won’t stick. If you do a simple test to learn if there is sealant on the surface it is much easier. What you need to do is spray a little water out on the concrete. When water beads are formed then the floor will be coated with a sealant. Until applying the paint you’ll need to remove all the sealant if you want it to stick. The best way to do that is with a shot blaster or an angle grinder. Be aware: This can cause damaging concrete dust so be sure to wear a face mask.
If you have no sealer then the next move is to degrease the ground. If the floor is stained by any oil or other chemicals then they will need to be removed or the chemical bond between the epoxy and the concrete floor’s upper surface will not be adequate.
Another thing you’ll have to do before you actually apply the epoxy floor paint you’ll use is to see that the floor is totally dry. After you have washed the floor and degreased it, it’s best to allow it to run overnight with a space heater to tolerate the epoxy as it should.
Make sure you follow these guidelines and you’re well driven in doing what you need to do to get the best outcomes. When you paint the concrete flooring bear in mind that you want an result that will look fantastic and be safe from too much moisture being absorbed.